3m Trade Show Displays & Backdrops

3m is the standard Australian shell scheme stand, so this is the default width and the deepest part of the range. It spans straight and curved tension fabric walls, velcro pop-up media walls, SEG light boxes, photo booth enclosures, arches and wall-mounted frames.

Talk to an expert
800+ Products available
50,000+ Orders
30+ Countries
22+ Years experience
3m Trade Show Displays & Backdrops
Square Shape Tension Fabric Display Arch With Header

Square Shape Tension Fabric Display Arch With Header

$1,030
Media Wall with Accessories

Media Wall with Accessories

$570
180° Curved Fabric Exhibition Booth Wall

180° Curved Fabric Exhibition Booth Wall

$1,431
SEG Popup Straight Media Wall

SEG Popup Straight Media Wall

$1,081
Square Arch Fabric Trade Show Booth with Built-In Shelf

Square Arch Fabric Trade Show Booth with Built-In Shelf

$1,112
SEG Frameless Fabric LED Light Box Display - 2.5m W x 2.5m H

SEG Frameless Fabric LED Light Box Display - 2.5m W x 2.5m H

$2,037
C Shape Tension Fabric Arch - 3m

C Shape Tension Fabric Arch - 3m

$747
Portable Inclined Fabric Exhibit Display

Portable Inclined Fabric Exhibit Display

$519

Not sure which display fits your booth?

Get a free 2D mockup with your artwork — see exactly how it looks before you order. 7,000+ happy exhibitors.

Talk to an expert
360° Custom Printed Exhibition Booth

360° Custom Printed Exhibition Booth

$2,737
Square shape Tension Fabric Display Arch

Square shape Tension Fabric Display Arch

$724
3D Moon-Shaped Tension Fabric Display

3D Moon-Shaped Tension Fabric Display

$887
Backlit SEG Fabric Display Frame - 80mm Depth Aluminum Profile

Backlit SEG Fabric Display Frame - 80mm Depth Aluminum Profile

$560
Wall-Mounted SEG Light Box

Wall-Mounted SEG Light Box

$728
Slim Fabric LED Backlit Exhibition Wall

Slim Fabric LED Backlit Exhibition Wall

$1,263
Non-Backlit SEG Fabric Media Display - 3m W

Non-Backlit SEG Fabric Media Display - 3m W

$1,698
Fabric Popup Curved Backwall Kit with Clamping Lights

Fabric Popup Curved Backwall Kit with Clamping Lights

$588
800+ Products available
50,000+ Orders
30+ Countries
22+ Years experience

Related Collections

Hanging Banners & Overhead Signage
Hanging Banners & Overhead Signage
Custom Printed Table Covers & Throws
Custom Printed Table Covers & Throws
Custom Trade Show Counters & Podiums
Custom Trade Show Counters & Podiums
Magnetic Room Dividers & Partitions
Magnetic Room Dividers & Partitions
Printed Crowd Control Barrier Covers
Printed Crowd Control Barrier Covers
Retail Store Display Accessories
Retail Store Display Accessories

Not sure which display fits your booth?

Get a free 2D mockup with your artwork — see exactly how it looks before you order. 7,000+ happy exhibitors.
Talk to an expert
Not sure which display fits your booth?

What our customers say

4.9from 7,200+ reviews
Ordered a backdrop banner, they recommended enhancing image. A good call. The banner arrived within a week and it looks great/ good quality. Will use them again
Shaun PageEvents Director, BluePeak
The whole experience from designing, viewing the mock-up and delivery was simple and efficient. The end product proved to be better than expected. Will be ordering again.
Des DavidEvents Director, BluePeak
The customer service was awesome. Placed order on the Friday, recieved mock up on Saturday and recieved our order in 5 days. Very efficient process and happy with the product. This is our second order.
DianaFounder, Trendline Co.
Good communication. Very helpful. The product we ordered is as we anticipated. A canvas bag was included, along with Velcro tape for installation. Overall, it was an excellent experience. We are very happy with the result and would not hesitate to recommend them to others.
Michele BakerBrand Manager, NovaTech

Frequently Asked Questions

Will a 3m wall actually fit inside a 3m shell scheme stand? +
It will if you order the graphic to about 2.9m rather than a true 3m. Octanorm bays are quoted on 3m centres, and the clear opening between the uprights typically measures 2.9m to 2.95m, so a full 3m frame will foul the posts. The exhibitor manual usually states the internal dimension; if it only gives centres, work to 2.9m and you will have 25mm to 50mm of tolerance at each end.
Is a fabric wall cheaper than paying the organiser for shell scheme panel graphics? +
Over two shows, yes. Panel graphics are cut to that venue's exact panel sizes, get bagged at pack-down and are almost never reusable, so you pay again at the next event. A freestanding 3m frame travels with you and only the printed cover ever needs replacing. The trade-off is coverage: panel graphics wrap the side walls as well, so if you need all three walls dressed, look at Shell Scheme Panels & Graphics instead.
Does the curve earn its keep at 3m? +
Yes, which is not true at narrower widths. A 3m curved frame such as the Curved Tension Fabric Portable Media Wall is measured along its arc, so it occupies roughly 2.7m of your frontage but gains 700mm to 900mm of concealed floor behind it, which is enough for a stacked pallet of stock. You give up flat graphic area, so a curve is the wrong choice for step-and-repeat or for artwork built around one large squared-off logo lockup.
How high should the display be? +
2.5m or just under. Shell scheme walls are 2.5m high, and the Portable 2.5m High Fabric Exhibit Display is built to sit level with that top rail so the stand reads as one finished box. Going above the walls needs written organiser approval, a dressed rear face, and often a setback from the neighbouring stand. Under 2.5m you are inside the rules everywhere and no one asks you anything at build-up.
If I can only afford one item, what should it be? +
The back wall, every time. It is the only thing visible from more than five metres away, and a bare white Octanorm panel behind a good counter still reads as an empty stand. Spend on the wall, then add two clamp lights before you add anything else, because a 3m unlit graphic in a hall lit for circulation loses most of its contrast. A counter is third, and a screen is a distant fourth.
What do I use on a corner or open-sided 3m stand? +
Something that turns a corner, because a flat back wall does half the work when two sides are open. The 180° Curved Fabric Exhibition Booth Wall and the Custom 180° Curved Enclosure Wall wrap the space so there is a graphic facing whichever aisle a visitor arrives from, and the Portable S-Shaped Fabric Exhibit Display does the same in a shallower footprint. Keep the open corner genuinely open; blocking it removes the reason you paid for the position.
When do I move up to 6m, and is 2.4m ever the smarter buy? +
Move up when you have booked two bays or an open 6m frontage, and use 6m Trade Show Displays & Backdrops, which is built around a continuous run rather than a single panel. Drop to 2.4m Trade Show Displays & Backdrops when floor storage matters more than graphic area, because a narrower wall inside a 3m bay leaves you a working corner. The cost of dropping down is a stand that reads slightly less full from the aisle.
How do I get artwork onto one of these and what happens after I order? +
Send us the frame you have chosen and whatever artwork exists, even if it is only a logo and a colour reference. Our team sets the file up to that exact frame at no cost and sends you a free 2D mockup so you can see the layout on the real shape before we print. Reach us at support@backdropsource.com.au or +61 7 3053 8668. Delivery is free Australia-wide, and frames and hardware are covered by a 1-year warranty.