2.4m Trade Show Displays & Backdrops

Displays sized for a stand or bay about 2.4m wide, narrower than a standard shell scheme, so a metre of floor stays free for stock. The range runs from straight and curved tension fabric walls to backlit SEG light boxes, arches and counters.

Talk to an expert
800+ Products available
50,000+ Orders
30+ Countries
22+ Years experience
2.4m Trade Show Displays & Backdrops
Premium Straight Tension Fabric Backdrop Display

Premium Straight Tension Fabric Backdrop Display

$352
Portable Straight Fabric Pop-Up Wall

Portable Straight Fabric Pop-Up Wall

$484
Curved Tension Fabric Portable Media Wall

Curved Tension Fabric Portable Media Wall

$365
Portable Straight Fabric Media Wall – Square Corners

Portable Straight Fabric Media Wall – Square Corners

$352
Tension Fabric Step & Repeat Display Wall

Tension Fabric Step & Repeat Display Wall

$352
EZ Fabric Banner Stands for Trade Show Displays

EZ Fabric Banner Stands for Trade Show Displays

$331
Table Pop Up Fabric Display Counter (For Podium & Booth Exhibitions)

Table Pop Up Fabric Display Counter (For Podium & Booth Exhibitions)

$458
Premium Straight Fabric Wall with LED Spotlights

Premium Straight Fabric Wall with LED Spotlights

$592

Not sure which display fits your booth?

Get a free 2D mockup with your artwork — see exactly how it looks before you order. 7,000+ happy exhibitors.

Talk to an expert
Portable 2.3m High Fabric Exhibit Display

Portable 2.3m High Fabric Exhibit Display

$541
Custom Circle Fabric Backdrop Display

Custom Circle Fabric Backdrop Display

$457
Modular EZ Cubic Fabric Tower Display

Modular EZ Cubic Fabric Tower Display

$656
3D Wall Box Fabric Exhibition Display

3D Wall Box Fabric Exhibition Display

$1,044
SEG Frameless Fabric LED Light Box Display - 3m W x 2.5m H

SEG Frameless Fabric LED Light Box Display - 3m W x 2.5m H

$2,424
Fabric Pop Up Curved Velcro Media Wall

Fabric Pop Up Curved Velcro Media Wall

$484
SEG Light Box Folding Stand

SEG Light Box Folding Stand

$1,163
Fabric Popup Straight Backwall Kit with Clamping Lights

Fabric Popup Straight Backwall Kit with Clamping Lights

$588
800+ Products available
50,000+ Orders
30+ Countries
22+ Years experience

Related Collections

Non-Backlit SEG Fabric Displays
Non-Backlit SEG Fabric Displays
SEG Pop-Up Fabric Displays
SEG Pop-Up Fabric Displays
Custom Printed Table Covers & Throws
Custom Printed Table Covers & Throws
Custom Trade Show Counters & Podiums
Custom Trade Show Counters & Podiums
Hanging Banners & Overhead Signage
Hanging Banners & Overhead Signage
Printed Crowd Control Barrier Covers
Printed Crowd Control Barrier Covers

Not sure which display fits your booth?

Get a free 2D mockup with your artwork — see exactly how it looks before you order. 7,000+ happy exhibitors.
Talk to an expert
Not sure which display fits your booth?

What our customers say

4.9from 7,200+ reviews
Ordered a backdrop banner, they recommended enhancing image. A good call. The banner arrived within a week and it looks great/ good quality. Will use them again
Shaun PageEvents Director, BluePeak
The whole experience from designing, viewing the mock-up and delivery was simple and efficient. The end product proved to be better than expected. Will be ordering again.
Des DavidEvents Director, BluePeak
The customer service was awesome. Placed order on the Friday, recieved mock up on Saturday and recieved our order in 5 days. Very efficient process and happy with the product. This is our second order.
DianaFounder, Trendline Co.
Good communication. Very helpful. The product we ordered is as we anticipated. A canvas bag was included, along with Velcro tape for installation. Overall, it was an excellent experience. We are very happy with the result and would not hesitate to recommend them to others.
Michele BakerBrand Manager, NovaTech

Frequently Asked Questions

Will a 2.4m backdrop look undersized inside a 3m stand? +
No, provided you push it to one side rather than centring it. A 3m Octanorm bay is quoted on 3m centres but the clear internal opening usually lands between 2.9m and 2.95m, so a 2.4m wall leaves roughly 500mm at one end. Centred, that reads as two awkward gaps. Hard against one upright, it reads as a deliberate service corner for cartons, coats and a bin, and the graphic still fills the sightline from the aisle.
Straight or curved at this width? +
Straight, in almost every case. A curved frame is measured along the arc, so a 2.4m curve occupies only about 2.2m of frontage once it is set, and at this width you cannot spare 200mm. The curve does buy self-supporting stability and a shallow void behind it, which matters more from 3m up. A straight wall needs feet, so keep them inside your floor line rather than letting them creep into the aisle.
How tall can I go in a 2.4m bay? +
Stay under 2.5m. Shell scheme walls are 2.5m high, and organisers treat anything taller as a structure that needs approval and a finished rear face so neighbours are not looking at your frame. The Portable 2.3m High Fabric Exhibit Display sits just under the rail with clearance for the cover to seat properly. Freestanding frames around 2.2m to 2.3m are the practical ceiling for an inline bay.
Can I light one of these without ordering power from the organiser? +
No. Clamp lights and the LED spotlights on the Premium Straight Fabric Wall with LED Spotlights all need a 10A outlet, and outlets are ordered through the exhibitor manual, usually weeks before the show. Order one more outlet than you think you need, because a counter, a screen and a phone charger fill a single power board fast. Every lead, board and fitting must be test-and-tagged to AS/NZS 3760, and floor staff do check.
Should I buy a backlit light box instead of a printed wall? +
Only if the hall lighting is poor or your graphic is dark. The SEG Frameless Fabric LED Light Box Display - 2.5m W x 2.5m H is the closest fit to a 2.4m bay and holds colour where a front-lit wall goes flat and grey. The costs are real: it is heavier to freight and handle, it needs power for the whole run rather than two spotlights, and the graphic is printed for backlighting so it will not transfer onto a non-lit frame later.
How long does a 2.4m stand take to set up? +
One person, 20 to 30 minutes, for a pop-up wall like the Portable Straight Fabric Pop-Up Wall. A tension fabric frame plus a counter and lights runs closer to 40 minutes and goes faster with two people, because seating the cover means walking the frame and one person ends up doing laps. Build the frame flat on the floor, stand it, then dress it. Leave the lights until the wall is in its final position.
When should I step up to the 3m range instead? +
When the bay is genuinely 3m wide and your stock can live off-stand or inside a counter. The 3m Trade Show Displays & Backdrops range fills the bay corner to corner, which reads as a fuller stand and gives you roughly 25 percent more graphic area. What it costs you is the storage gap: every carton then has to go behind a counter, under a table or into the organiser's storeroom, which is a walk you will make several times a day.
What do I need to send you to get a 2.4m display printed? +
Send the frame width you need and your artwork, or just your logo files if the layout is not settled. Email support@backdropsource.com.au or call +61 7 3053 8668 and our team will set the artwork up for you at no charge, then send a 2D mockup showing exactly how the graphic sits on that frame before anything goes to print. Shipping is free anywhere in Australia, and the aluminium frame and hardware carry a 1-year warranty.